CFAXZIF-DEMO: USB-to-parallel adapter recommendation?

SWB

New member
Can you recommend a USB-to-parallel adapter that works with the CFAXZIF-DEMO board? It looks like many of these types of adapters only work with printers.

Thanks!
Looking for additional LCD resources? Check out our LCD blog for the latest developments in LCD technology.
 

CF Tech

Administrator
I would be a bit surprised if the demo board and software works properly over a USB-to-parallel adapter. We wiggle each control line on the port in ways that are not common to printers. My understanding is that the USB-to-parallel adapters only wiggle the control lines in a way that a printer would understand.
 

SWB

New member
Thanks ... yeah, that appears to be the case. The CFAX_WinTest software talks to the parallel port through a special driver on one of the standard hardware parallel-port addresses, which even a low-level USB-to-IEEE1284 adapter (if one exists) wouldn't match. Of course, since the source code is provided, one could probably tweak the software to work with such a low-level adapter (if one exists), but out-of-the-box, it looks like the demo board/software combination only works with a real, old-fashioned parallel port.

I dusted off one of my old computers that still had a parallel port and was able to get the demo board/software up and running successfully on that. I have some questions about the LCD itself now, which I'll ask in a new thread.

By the way the CFAXZIF-DEMO product page links to the wrong software. It links to https://www.crystalfontz.com/software/CFAX_WinTest/; it should link to https://www.crystalfontz.com/product/CFAX_WinTest.
 
Top