Latest activity
-
CCF Kelsey reacted to JohnWest24365's post in the thread CFAL12864D0154MW - ARM Cortex-Mx Driver on github with
Like.
Hello All: Just thought I'd post a sort-of 'PSA' here - but there's a driver posted on github that works just fine with the... -
CCF Kelsey replied to the thread CFAL25664C0-021M-W I2C issue.We have replicated the issue you reported and are looking for a resolution. One work around is that you can bit bang images without...
-
CCF Kelsey replied to the thread CFAL25664C0-021M-W I2C issue.Are you using an arduino-type microcontroller or something else? If you're using arduino and the wire library, it sounds like there are...
-
CCF Kelsey replied to the thread CFAL25664C0-021M-W I2C issue.Hi, Thanks for posting. Can you add pictures of your set up and the code where you're seeing the issue? Here are some things to check...
-
CCF Kelsey replied to the thread Help with CFA10102 Multi-use ZIF Breakout Board?.Hi Han, The CFA10102 is a general purpose breakout board, so it can be used with any display with 40 pins or fewer, but it requires...
-
CCF Kelsey replied to the thread SKD204-634 V2.2 Arduino SPI.Hi, Thanks for reaching out with your question. I'm attaching a SPI example and a datasheet from the era. Hopefully these will help!
-
Ccosmicvoid replied to the thread Level Shifters??.Does it make any difference if you drive the OE line from an unused port pin set low? BTW, does AA9GG happen to be a call sign? I was a...
-
CF Tech replied to the thread Electric interference on USB?.The USB on those modules has always been rock solid. I can't recall any USB trouble that was not related to some software (driver) issue... -
TXB0108 or TXS0108E. The 'automatic' ones tend to be a little bit slower propagation delay. You'll have to check data sheets for that...
-
CF Tech replied to the thread Electric interference on USB?.Thanks for your message. Wood is not an ideal case material from an EMI-RFI-ESD standpoint, but I have had many of these displays...
-
CF Tech reacted to Technaton's post in the thread Use CFA635TMLKU33 with ATX functionality without ATX with Like.
Hey, thanks for the quick response! That was indeed it. In case somebody else has the same problem, here's the code I used (a quick...
-
Ccosmicvoid replied to the thread Level Shifters??.TXB0108 or TXS0108E. The 'automatic' ones tend to be a little bit slower propagation delay. You'll have to check data sheets for that...
-
Ccosmicvoid replied to the thread Level Shifters??.So then you want something one-directional (5v -> 3v) instead of bi-directional (5v<->3v) as you indicated? In which case, what do you...
-
Ccosmicvoid replied to the thread Level Shifters??.74LVC4245
-
CF Tech reacted to AA9GG's post in the thread 2.4" EVE Touchscreen Display - Where do I start? with Like.
ok...I kinda had a feeling it was something like that. I wound up abandoning that Arduino code for the XMEGA code done by Rudolph. My...