631 Lcd

[yaman]

i connected my LCD to the USB on my mother board, after switching ON the PC, i did not see anything on the LCD screen and did smell something strange so immediately switch it off.

i have USB1 and USB2 on my motherboard, i connected the cable to USB2 and make sure to be connected as per the mother baord manuel:

+5v -D +D Ground

can someone advise what might be wrong

thanks

Crystalfontz LCD Blog

Looking for additional LCD resources? Check out our LCD blog for the latest developments in LCD technology.

 

[yaman]

LCD 631

this is how the USB looks like on thr motherboard as the attched word file, but physically at the top there is 4 pins and at the bottom there is 5 pins,

can you explain where to connect the 4 pins, is the on the top one or the bottom one.

thanks

 

[CF Tech]

If it smelled strange, then the +5v and Ground probably got reversed.

Does the display still work if you use the beige USB cable?

Can you get us a link to the manual?

 

[yaman]

LCD 631

can you provide an e-mail address as i tried to attached a file to you but it never worked, so provide an e-mail and i will send you the the page related to the USB.

waiting for your e-mail

thanks for replying

 

[yaman]

th link to the manual is: http://www.msi.com.tw/program/support/manual/mnu/spt_mnu_detail.php?UID=618&kind=1

USB connectors at page: 23

thanks

 

[yaman]

LCD 631

i think i connected it the proper way now as:

GRD + - VCC

but still telling me the LCD is not connected,

do you think the LCD is busted

your reply is highly apreciated

 

[CF Tech]

From the manual link you PM'd me:

 

[yaman]

now i know i have done the right connection, still the LCD is not responding,

please advise

 

[CF Tech]

Please write support(at)crystalfontz(dot)com (edit to '@' & '.'), and refer to this thread:

https://forum.crystalfontz.com/showthread.php?threadid=3794

You should get a reply on Monday.