2 lcd display's

scorpio@nl

New member
Hello dear sir,madam

My name is jan bax

I am from holland and bought a while a go on ebay 2 displays.

I am looking for a controller to hook them up to the usb or the lpt poort so i can build them on to my new Pc.


These are the specs i have

LCD 320x 240 NEUF; SANYO LCM-5520-24NTK display 1




- Hitachi LM688XW ( nec pwd-507 display 2



This is a big one
From an old nec laptop.

is there any one who could help me with a controller on the usb port to connect them with my pc
or to another connector
Looking for additional LCD resources? Check out our LCD blog for the latest developments in LCD technology.
 

Henri

New member
You can find a datasheet for the Sanyo display here: http://balva.chez-alice.fr/LCM552024NAK.pdf

Looks like a normal 4-bit input controllerless LCD. You could drive that with S1D13700 controller for example.

You did notice that this forum section is called "Crystalfontz Products - Technical Support", "Having problems with your Crystalfontz hardware? Ask about it in here." ? This thread might fit better under the "Other topics" section to be more on topic...

(Note from admin: Thread moved. )
 
Last edited:

Henri

New member
I don't know closer specifications of the NEC LCD.

But if you search for "LM688xw lcd" the results include this page:
http://www.elektroda.pl/rtvforum/topic70364-300.html
Again gives a link to here:
http://www.iser.uni-erlangen.de/index.php?ort_id=322&inventarnummer=I0914
Telling the LCD is used in a NEC MultiSpeed notebook.
Search for NEC multispeed gives some hints that it has a CGA display. Then finding some information about CGA tells that CGA maximum resolution is 640x200. So the resolution might be 640x200.
This is what couple minutes with a search engine reveals and this is where I'll stop and let you hunt for any further information :)


scorpio@nl said:
is there any one who could help me with a controller on the usb port to connect them with my pc
For the Sanyo display try searching for "USB S1D13700". ;)
 
Top