Mounting COG display ?

[RacerX10]

How are people physically mounting COG type displays like this one :

??

http://www.crystalfontz.com/product/CFAL12864C-Y-B1.html

I've only used the standard header displays before with the hole in each corner for a standoff mount.

Thanks for your comments !

Crystalfontz LCD Blog

Looking for additional LCD resources? Check out our LCD blog for the latest developments in LCD technology.

 

[CF Tech]

Generally those go into a molded recess in the front of a handheld case.

For small production or prototypes, you can use an adhesive like 3M 467MP to seal the display to the front panel. There might need to be some mechanical backing too.

I have seen the display mounted to the PCB using foam tape. When the PCB is mounted to the front panel, the tape compresses, pushing the display into the molded recess.

 

[RacerX10]

Generally those go into a molded recess in the front of a handheld case.

For small production or prototypes, you can use an adhesive like 3M 467MP to seal the display to the front panel. There might need to be some mechanical backing too.

I have seen the display mounted to the PCB using foam tape. When the PCB is mounted to the front panel, the tape compresses, pushing the display into the molded recess.

Thank you very much !