iagothemad
New member
Hey I have a newbie question hooking up my display. I can't get Windows XP to recognize the device even though I'm following the instruction from the site closely, so I'm probably doing something wrong with the actual connection.
On my little motherboard schematic there's a spot for 4 USB connections which is where I'm connecting the disp... the layout of the pins is labeled like this:
So my assumption was that the relevant pins are those first four virtically, with d- and d+ connected to their corresponding -/+ and GND being ground and VCC connected to whatever that last one is. But obviously maybe not. Oh and now that I look at it I'm useing the last USB position, which is 4 I guess (there are two full sets like the layout above). What am I doing wrong here???
Thanks
On my little motherboard schematic there's a spot for 4 USB connections which is where I'm connecting the disp... the layout of the pins is labeled like this:
Code:
VCC [] [] VCC
DATA0- [] [] DATA1-
DATA0+ [] [] DATA1+
GND [] [] GND
KEY [] [] NC
Thanks
Looking for additional LCD resources? Check out our LCD blog for the latest developments in LCD technology.