Titan Flow Transducer

[elowan]

Hi,

I was wondering if the SCAB with one of the displays could work with an NPN 5V pulse? Basically, I am trying to see if it would work with the Titan Flow Transducer (http://www.flowmeters.co.uk/pdf/turbine_meters/Flow_Transducer/Flow-transducer.pdf)

If it could work with this and convert to L/min that would be fantastic.


Regards,
Mike

Crystalfontz LCD Blog

Looking for additional LCD resources? Check out our LCD blog for the latest developments in LCD technology.

 

[jc634]

From what I read on the data sheet, it would appear to have a pulsed output, which should work with a SCAB. You would need to the pulse to L conversation ratio and most likely need to use the math functions in CC2 to convert pulses to liters.

As an alternate, I have used a Swissflow device for a year or so now, tho, that does work quite nicely with the SCAB/CC2: http://www.swissflow.com/en/SF800

 

[elowan]

Thanks for the reply. I had been considering the Swissflow since I saw several people had it working with the SCAB. The only reason I checked out the Titan was that it is native 1/2" ID compatible.