LCD only displaying half of screen?

cpl rampage

New member
Ok i just made this LCD setup with a 1x16 lcd display, based on the ks0062f00.

the problem is that when trying to display things, the screen seems to be arranged like the first 8 characters are one line, and the ladt 8 are another line. i am just wondering if this is a common problem, or if there is a way to fix it.

this is not the first lcd i have made, and i am positive that it is wired right. i have used both JaLCDs and LCD smarty with the same results. its not the computer, because i can run my other 16x2 lcd just fine

any help is apreciated
Looking for additional LCD resources? Check out our LCD blog for the latest developments in LCD technology.
 

CF Tech

Administrator
A 16x1 is typically laid out logically like an 8x2, with the top "8x2 line" to the left, and the bottom "8x2 line" to the right.
 

cpl rampage

New member
CF Tech said:
A 16x1 is typically laid out logically like an 8x2, with the top "8x2 line" to the left, and the bottom "8x2 line" to the right.
oh really? i did not know that. because all of the lcds i had made before were 16x2

thanks for the help
 
Top