If your CC2 service keeps dying, check this out.


For those of you who have had the CC2 service stop working.

I recently had a this happen to me with my computer that has a 635 and 633 attached. I deleted some screens on the 635 that I no longer needed. I restarted CC2 and 5-10 seconds later, the service stopped. Restarted again and same thing. I reordered a few screens and... same problem.

I restarted the computer and... same problem.

Then I noticed... There was no Starting Screen for the 635. It was blank. I am sure that the Starting Screen was one of the screens I had deleted. Anyway, chose a screen for the Starting Screen and all was OK.

This was with the 20070812/928 release (most current).

So... If this happens to you, you might want to check the Starting Screen box in the Configuration program. I can't say if this is the problem that some people have been having, but it is at least something to check.
Looking for additional LCD resources? Check out our LCD blog for the latest developments in LCD technology.