CFAX12864CP1 TFH backlight for 3.3V application

[jtagged]

I'm using the CFAX12864CP1 for a 3.3V application, but pg 9 of the datasheet specs the min/max LED voltage to 3.4/3.6V. (The LCD and controller work fine at 3.3V, of course).

Will the CFAX12864CP1 TFH backlight LED work at 3.3V?

Thanks

Crystalfontz LCD Blog

Looking for additional LCD resources? Check out our LCD blog for the latest developments in LCD technology.

 

[CF Support2]

The CFAX12864CP1-TFH is optimized to operate with a 3.3v supply so the LED will operate fine.

 

[jtagged]

Great, thanks!

A follow up question: What's the orientation of the LED anode/cathode terminals "A"/"K"? For instance if I'm looking at the LCD in landscape orientation with the ZIF tail pointing down.

 

[CF Support2]

If you are looking at the front of the module, the Anode (A) is on the left and the cathode (K) is on the right.