635, SCAB and front LEDs

[IanB]

When the SCAB is connected to a CF-635, does this prohibit the use of the front-panel LEDs? I'm asking because the SCAB data sheet (v. 1.1) has an image of a SCAB connected to H2 on the 635. The 635 data sheet lists this port as "Expansion and LEDs".

I can't find anywhere in either the 635 or SCAB data sheet which explicitly states which port to connect with.

Crystalfontz LCD Blog

Looking for additional LCD resources? Check out our LCD blog for the latest developments in LCD technology.

 

[jc634]

Both can be used at the same time. I have a 635 with SCAB, and the LED's work great.

Jim

 

[CF Tech]

The SCAB does not plug into H2. Those photos are in error (oops, who could have taken that shot). The updated data sheet will show the SCAB plugged (correctly) into H1.

 

[IanB]

Thanks to jc634 for the response and to CF for the clarification on the data sheet.

Also noticed that the website images are the same: http://www.crystalfontz.com/products/SCAB/635_with_SCAB_430.jpg and http://www.crystalfontz.com/products/SCAB/635_with_SCAB_1024.jpg.