Temperatures in Fahrenheit?

S

starlon

New member
I don't see a way to display temperatures in fahrenheit, so I'm assuming there isn't a way. It would be nice if both scales were available.
Crystalfontz LCD Blog
Looking for additional LCD resources? Check out our LCD blog for the latest developments in LCD technology.
 
S

starlon

New member
Well, that's close. I see it's possible then. I have 4 sensors though, so I need to make some changes. There's no way to do this from the GUI?

Edit: Actually these temperatures seem off. Ambient is 24.25c, yet this screen says it's 56.2f.
 
Last edited:
S

starlon

New member
Well I thought I was on the right track. The Fahrenheit column displays [E01]. I'm guessing that's an error code? Am I heading in the right direction?

Code: 
[pre]
rows=4
cols=20

[mod00]
name="temp01_id_name"
id=@05
[mod01]
name="temp01_id_temp"
id=@06

[mod02]
name="temp02_id_name"
id=@07
[mod03]
name="temp02_id_temp"
id=@08

[mod04]
name="temp03_id_name"
id=@09
[mod05]
name="temp03_id_temp"
id=@10

[mod06]
name="temp04_id_name"
id=@11
[mod07]
name="temp04_id_temp"
id=@12

[from04]
from="cc2_calc.ini"
sec="calc#"
opt01="id=@45"
opt02="a_type=1"
opt03="a_val=@06"
opt04="b_type=2"
opt05="b_val=1.8"
opt06="operation=*"
opt07="precision=1"

[from05]
from="cc2_calc.ini"
sec="calc#"
opt01="id=@46"
opt02="a_type=1"
opt03="a_val=@45"
opt04="b_type=2"
opt05="b_val=32"
opt06="operation=+"
opt07="precision=1"


[screen]
screen_name="SCAB_Temps"
options=0
alt_delay=5000


[r00]
options=0

[r00-i00]
length=5
id=@05

[r00-i01]
string=" "

[r00-i02]
length=4
id=@06

[r00-i03]
string="\128C "

[r00-i04]
length=4
id=@46

[r00-i05]
string="\128F "
 
Last edited:
J

jc634

Administrator
The code appears to be correct, at least nothing obvious.

What I would suggest is to renumber the mods and froms sequencilly (sp?) starting at 00 to xx.

I'm not sure that this would make a differance, but it would not hurt to try this just to eliminate a possible problem.
 
You must log in or register to reply here.
Top