• We recently switched our forum platform. If you experience any issues please email support@crystalfontz.com

Setup Problems w 634

DANDUACAM

New member
I don't have any problems with Crystal Fonz Boot Screen Setup.

With CC2 the contrast and brightness do not work, I do get a lot of Zeros and some ODD characters on the lines I program text to, the remaining lines 2 thru 4 are filled w/ "/" marks and a white box appears on each line to the RH side.

Any suggestions.

TU

Dan C
Looking for additional LCD resources? Check out our LCD blog for the latest developments in LCD technology.
 

CF Mark

Administrator
I don't have any problems with Crystal Fonz Boot Screen Setup.
With CC2 the contrast and brightness do not work, I do get a lot of Zeros and some ODD characters on the lines I program text to, the remaining lines 2 thru 4 are filled w/ "/" marks and a white box appears on each line to the RH side.
Is it displaying any of the correct text?

The com port baud rate setting might be wrong.
Double check that in the module configuration dialog.
 
Top