looks great so far. You can order a replacement Audigy bezel that is black, or if you wish to paint, i recomend Krylon Fusion paint. Clean the bezel with rubbing alcohol or paint thinner to remove any oils and dirt, then once dry, paint the bezel using very very light coats. allowing to dry for 15 seconds, then apply another very very light coats. It may take 3 or 4 coats before a completely opaque covering is produced. Just follow the instructions on the back of the can, its pretty easy.
oh, dont forget to mask off the IR window. Masking tape works best.
Here is a link to the black bezel for the audigy 2:
http://pcworld.pricegrabber.com/search_getprod.php/masterid=717912/
It seems to be sold out most places. Its more expensive than a can of paint, but will look more professional because the labels will all be readable.
dec22_21 newest lcd 640.jpg
