Hello,
I have a new Windows XP SP2 appliance with an integrated 635 module. I am able to use the 635_WinTest_1_0.exe application and change the screen however the CC2 application will not make changes to the default display. Everything appears to be running correctly with CC2 just no response from changes. In reading other threads I made sure that the Alt Enabled option is checked and also I changed the dkc_disable=0 within the cc2_service file with no effect. The display is configured for com3 @ 115200 baud and the service correctly starts (changes to blue). Any recommendations would be greatly appreciated.
Thanks
Jim-
I have a new Windows XP SP2 appliance with an integrated 635 module. I am able to use the 635_WinTest_1_0.exe application and change the screen however the CC2 application will not make changes to the default display. Everything appears to be running correctly with CC2 just no response from changes. In reading other threads I made sure that the Alt Enabled option is checked and also I changed the dkc_disable=0 within the cc2_service file with no effect. The display is configured for com3 @ 115200 baud and the service correctly starts (changes to blue). Any recommendations would be greatly appreciated.
Thanks
Jim-
Looking for additional LCD resources? Check out our LCD blog for the latest developments in LCD technology.