It's a very good idea. I also connected my 633 to the WOL for getting the Standby-Voltage.
I would also tell you what some Mobo's have problems with connecting the 633 to the power control pin. My Epox EP-8RDA+ is such a example.
I built a little circuit with 2 transistors, the first is an inverter and the second switches a relay, that is connected with the Mobo. With that it works. The reset made no problems.
I would also tell you what some Mobo's have problems with connecting the 633 to the power control pin. My Epox EP-8RDA+ is such a example.
I built a little circuit with 2 transistors, the first is an inverter and the second switches a relay, that is connected with the Mobo. With that it works. The reset made no problems.
Looking for additional LCD resources? Check out our LCD blog for the latest developments in LCD technology.
