633 Installation woes

rsk

New member
dear forum,

i received my cf 633 - hooked up the power and the serial cable, set the port settings both in control panel and win_test to 19200 baud 8bits 1 stop no parity no flow control (deduced from the datasheet). however, even though the lcd lights up on boot and displays the standard splash, all attempts to ping it, set the text or anything else fail from both wintest and cc.

the label on the package did say 'jumpered for alternate rs-232 pinout' - is that causing the problem?
Looking for additional LCD resources? Check out our LCD blog for the latest developments in LCD technology.
 
USB LCD Displays - Graphic and Character LCDs with a Keypad
Top